 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Model WS100 with analog output Explosion-proof Sensor for hostile environments and offshore applications, with compression-proof sealing * Protection class IP68 * Measurement ranges: 0 ... 2000 mm und 0 ... 3500 mm * Analog output II 2GD EEx d IIC T6 IP67 (being prepared) * * Also available as non-ex version in an anodized aluminium housing Outputs Specifications Material Resolution Sensing device Connection Linearity Weight Temperature range Conformity to standards Explosion-proof EMC Protection class of housing Shock Vibration Potentiometer: 1 kW Voltage: 0...10 V Current: 4...20 mA, 2 or 3 wire Stainless steel or aluminium; cable: stainless steel Essentially infinite Hybrid precision potentiometer Cable output, standard length 1.5 m Up to 0.05 % full scale Approx. 13 kg (stainless steel) -20 to +70 C EN 50014:2000; EN 50018:2000; EN 50281-1:1999 EN 61326:2004 EN 60529:2000, IP 67 EN 60068-2-27:1993, 50 g 11 ms, 100 shocks EN 60068-2-6:1995, 20 g, 10 Hz...2 kHz, 10 cycles Order code WS100 Analog WS100xxx Model name WS100EXD = Ex version WS100AL = Non-ex version in aluminium housing Measurement Range (in mm) 2000 / 3500 Outputs (see pages 57 and 58) R1K = potentiometer 1 kW (other values on request) 10V = with 0 ... 10 V signal conditioner 420A = mit 4 ... 20 mA signal conditioner (2 wire) 420T = mit 4 ... 20 mA signal conditioner (3 wire) Other outputs on request Linearity L10 = 0.10 % option: L05 = 0,05 % L25 = 0.25 % Connection KAB1,5M = cable output, length 1.5 m (standard) Cable fixing M4 = M4 cable fixing SB0 = Cable clip Order Example: WS100EXD - 2000 - 420A - L10 - KAB1,5M - M4 42 CAT-WS-E-05 www.asm-sensor.com ASM Model WS100 with analog output Explosion-proof Cable forces typical at 20 C Range [mm] 2000 3500 Maximum pull-out force [N] 5.2 6.2 Minimum pull-in force [N] 2.8 3.0 Outline drawing WS100 - 2000 Outline drawing WS100 - 3500 Dimensions informative only. For guaranteed dimensions consult factory. ASM CAT-WS-E-05 43 www.asm-sensor.com Model WS100 with incremental encoder output Explosion-proof Sensor for hostile environments and offshore applications, with compression-proof sealing * Protection class IP68 * Measurement ranges: 0 ... 2000 mm and 0 ... 3500 mm * With incremental encoder output II 2GD EEx d IIC T6 IP67 (being prepared) * * Also available as non-ex version in an anodized aluminium housing Specifications Outputs Material Resolution Sensing device Connection Linearity Weight Temperature Conformity to standards Explosion-proof EMC Protection class of housing Shock Vibration Incremental encoder output HTL or TTL compatible Stainless steel or aluminium; cable: stainless steel 2000 mm: 5 or 10 pulses per mm 3500 mm: 2.75 or 5.5 pulses per mm Incremental encoder Cable output, standard length 1.5 m Up to 0.05 % full scale Approx. 13 kg (stainless steel) -20 to +70 C EN 50014:2000; EN 50018:2000; EN 50281-1:1999 EN 61326:2004 DIN EN 60529:2000, IP 67 DIN EN 60068-2-27:1993, 50 g 11 ms, 100 shocks DIN EN 60068-2-6:1995, 20 g, 10 Hz ... 2 kHz, 10 cycles Order code WS100 Incremental WS100xxx Model name WS100EXD = Ex-version WS100AL = Non-ex version in aliminium housing Measurement Range (in mm) 2000 / 3500 Pulses per mm 2000 mm: 5 / 10 3500 mm: 2.75 / 5.5 Outputs (see page 60) IE24LI = Incremental encoder TTL compatible inverted IE24HI = Incremental encoder HTL compatible inverted Connection KAB1,5M = Cable output, length 1.5 m (standard) Cable fixing M4 = M4 cable fixing SB0 = Cable clip Order Example: WS100EXD - 2000 - 10 - IE24HI - KAB1,5M - M4 44 CAT-WS-E-05 www.asm-sensor.com ASM Model WS100 with incremental encoder output Explosion-proof Cable forces typical at 20 C Range [mm] 2000 3500 Maximum pull-out force [N] 5.2 6.2 Minimum pull-in force [N] 2.8 3 Outline drawing WS100 - 2000 Outline drawing WS100 - 3500 Dimensions informative only. For guaranteed dimensions consult factory. ASM CAT-WS-E-05 45 www.asm-sensor.com Output Specifications R1K and 10V for WS position sensors Excitation Voltage Voltage divider R1K Potentiometer 32 VDC max. at 1 kW (input power 1 W max.) 1 kW 10% 25 x 10-6/ C full scale Depends on measurement range, individual sensitivity of sensor specified on label Approx. 3% ... 97% of full range -20 ... +85 C Potentiometer Impedance Thermal coefficient Sensitivity Voltage Divider Utilization Range Operating Temperature Signal diagram + Vin + Vout GND Note: The potentiometer must be connected as a voltage divider. The input impedance of the following processing circuit should be 10 MW min. Signal conditioner 10V Voltage output Excitation Voltage Excitation Current Output Voltage Output Current Output Load Stability (Temperature) Protection Output Noise Operating Temperature EMC +18 ... +27 V DC non stabilized 20 mA max. 0 ... +10 V DC 2 mA max. > 5 kW 50 x 10-6 / C full scale Reverse polarity, short circuit 0,5 mVRMS -20 ... +85 C According to EN 61326:2004 Signal diagram 10V Excitation + Excitation GND Signal + 0...10 V Signal GND Signal Wiring Output signals R1K + Vin GND + Vout 10V Excitation + Excitation GND Signal + Signal GND Cable color White Brown Green Yellow Connector pin no. 1 2 3 4 Connection Mating Connector View to solder terminals CONN-DIN-8F-W CONN-M12-8F-G ASM www.asm-sensor.com CAT-WS-E-05 57 Output Specifications 420A and 420T for WS position sensors Excitation Voltage Signal conditioner 420A Current output (2 wire) Excitation Current Output Current Stability (Temperature) Protection Output Noise Operating Temperature EMC +12 ... 27 VDC non stabilized, measured at the sensor terminals 35 mA max. 4 ... 20 mA equivalent to 0 ... 100% range 100 x 10-6 / C full scale Reverse polarity, short circuit 0.5 mVRMS -20 ... +85 C According to EN 61326:2004 Signal Diagram 420A Signal + 4...20 mA Signal - Signal Conditioner 420T Current output (3 wire) Excitation Voltage Excitation Current Load Resistor Output Current Stability (Temperature) Protection Output Noise Operating Temperature EMC +18...+27 V DC non stabilized 40 mA max. 350 W max. 4 ... 20 mA equivalent to 0 ... 100% range 50 x 10-6 / C full scale Reverse polarity, short circuit 0.5 mVRMS -20 ... +85 C According to EN 61326:2004 Signal diagram 420T Excitation + Signal + 4...20 mA Excitation GND Signal Wiring Output signals 420A Signal + Signal - 420T Excitation + Excitation GND Signal + Cable color White Brown Green Connector pin no. 1 2 3 Connection Mating Connector View to solder terminals CONN-DIN-8F-W CONN-M12-8F-G 58 CAT-WS-E-05 www.asm-sensor.com ASM Output Specification PMU for WS position sensors Signal Conditioner PMU, adjustable Voltage output and current output (3 wire) Excitation voltage Excitation current Voltage output Output current Output load Current output Load resistor Adjustment Activation of offset and gain adjust Scalable range Stability (Temperature) Protection Output noise Operating temperature EMC +18 ... 27 V DC 50 mA max. 0 ... 10 V 10 mA max. 1 kW min. 4 ... 20 mA (3 wire) 500 W max. Connect with excitation GND (0 V) 90 % max. full scale 50 x 10-6 / C full scale Reverse polarity, short circuit 1 mVeff -20 ... +85 C According to EN 61326:2004 Signal diagram Excitation + Excitation GND Signal 0...10 V + PMU Signal 0...10 V GND Signal 4...20 mA + Signal 4...20 mA GND Output signals Connector pin no. 1 2 3 4 5 6 7 8 Signal wiring Excitation + Excitation GND Signal 0...10 V + Signal 0...10 V GND Signal 4...20 mA + Signal 4...20 mA GND Offset Gain Connection Mating Connector View to solder terminals CONN-DIN-8F-W CONN-M12-8F-G ASM www.asm-sensor.com CAT-WS-E-05 59 Output Specifications IE24LI and IE24HI for WS position sensors IE24LI and IE24HI incremental Excitation voltage Excitation current Output frequency Output Output current Output voltage Stability (temperature) Operation temperature Protection EMC IE24LI IE24HI 5 V DC 10 % 10 ... 30 V DC 100 mA max. 200 kHz Push-pull and inverted signals 10 mA max. Depending on the excitation voltage 20 x 10-6 / C f.s. (sensor mechanism) -20 ... +85 C Short circuit According to EN 61326:2004 Output signals Excitation + Excitation GND Signal A Encoder IE24LI IE24HI Signal A Signal B Signal B Signal Z (reference pulse) Signal Z Output circuit and recommended processing input circuit Output signals Cable color Brown White Grey Green Pink Yellow Blue Red Connector pin no. 1 2 3 4 5 6 7 8 Signal wiring Excitation + Excitation GND Signal B (A + 90) Signal A Signal B Signal A Signal Z (reference pulse) Signal Z Connection Mating connector View to solder terminals CONN-DIN-8F-W 60 CAT-WS-E-05 www.asm-sensor.com CONN-M12-8F-G ASM |
Price & Availability of WS100
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |